#include <NBAlgorithms_Railway.h>

Data Structures
class	Track
	routing edge More...

Static Public Member Functions
static void	analyzeTopology (NBEdgeCont &ec)
static void	extendDirectionPriority (NBEdgeCont &ec, bool fromUniDir)
static std::set< NBNode * >	getRailNodes (NBEdgeCont &ec, bool verbose=false)
static double	getTravelTimeStatic (const Track const track, const NBVehicle const veh, double time)
static int	makeAllBidi (NBEdgeCont &ec)
static int	repairTopology (NBEdgeCont &ec, NBPTStopCont &sc, NBPTLineCont &lc)

Static Private Member Functions
static NBEdge *	addBidiEdge (NBEdgeCont &ec, NBEdge *edge, bool update=true)
	add bidi-edge for the given edge
static int	addBidiEdgesBetweenSwitches (NBEdgeCont &ec)
	add bidi-edges to connect switches that are approached in both directions
static int	addBidiEdgesForBufferStops (NBEdgeCont &ec)
	add bidi-edges to connect buffers stops in both directions
static int	addBidiEdgesForStops (NBEdgeCont &ec, NBPTLineCont &lc, NBPTStopCont &sc, bool minimal)
	add bidi-edges to connect successive public transport stops
static int	addBidiEdgesForStraightConnectivity (NBEdgeCont &ec, bool geometryLike)
	add bidi-edges to connect straight tracks
static bool	allBidi (const EdgeVector &edges)
static bool	allBroken (const NBNode node, NBEdge candOut, const EdgeVector &in, const EdgeVector &out)
static bool	allSharp (const NBNode *node, const EdgeVector &in, const EdgeVector &out, bool countBidiAsSharp=false)
static int	extendBidiEdges (NBEdgeCont &ec)
	add further bidi-edges near existing bidi-edges
static int	extendBidiEdges (NBEdgeCont &ec, NBNode node, NBEdge bidiIn)
static std::set< NBPTLine * >	findBidiCandidates (NBPTLineCont &lc)
	identify lines that are likely to require bidirectional tracks
static std::set< NBNode * >	getBrokenRailNodes (NBEdgeCont &ec, bool verbose=false)
static void	getRailEdges (const NBNode *node, EdgeVector &inEdges, EdgeVector &outEdges)
	filter out rail edges among all edges of a the given node
static bool	hasRailway (SVCPermissions permissions)
	filter for rail edges but do not return (legacy) all purpose edges
static bool	hasStraightPair (const NBNode *node, const EdgeVector &edges, const EdgeVector &edges2)
static NBEdge *	isBidiSwitch (const NBNode *n)
static bool	isStraight (const NBNode node, const NBEdge e1, const NBEdge *e2)
static int	reverseEdges (NBEdgeCont &ec, NBPTStopCont &sc)
	reverse edges sequences that are to broken nodes on both sides
static void	updateTurns (NBEdge *edge)
	recompute turning directions for both nodes of the given edge

Detailed Description

Definition at line 49 of file NBAlgorithms_Railway.h.

Member Function Documentation

◆ addBidiEdge()

NBEdge * NBRailwayTopologyAnalyzer::addBidiEdge	(	NBEdgeCont &	ec,
		NBEdge *	edge,
		bool	update = true )

staticprivate

add bidi-edge for the given edge

Definition at line 180 of file NBAlgorithms_Railway.cpp.

References CENTER, NBEdge::getFromNode(), NBEdge::getGeometry(), NBEdge::getID(), NBNode::getIncomingEdges(), NBEdge::getLaneSpreadFunction(), Parameterised::getParameter(), NBEdge::getToNode(), hasRailway(), NBEdgeCont::insert(), NBEdge::isBidiRail(), NBTrafficLightDefinition::OSM_DIRECTION, NBEdgeCont::retrieve(), PositionVector::reverse(), Parameterised::setParameter(), TL, updateTurns(), NBEdgeCont::wasIgnored(), and WRITE_WARNINGF.

Referenced by addBidiEdgesBetweenSwitches(), addBidiEdgesForBufferStops(), addBidiEdgesForStops(), addBidiEdgesForStraightConnectivity(), extendBidiEdges(), and makeAllBidi().

Here is the caller graph for this function:

◆ addBidiEdgesBetweenSwitches()

int NBRailwayTopologyAnalyzer::addBidiEdgesBetweenSwitches ( NBEdgeCont & ec )

staticprivate

add bidi-edges to connect switches that are approached in both directions

Definition at line 778 of file NBAlgorithms_Railway.cpp.

References addBidiEdge(), CENTER, getBrokenRailNodes(), NBEdge::getFromNode(), NBEdge::getLaneSpreadFunction(), getRailEdges(), NBEdge::getToNode(), isBidiSwitch(), isStraight(), joinToString(), n, TL, toString(), and WRITE_MESSAGEF.

Referenced by repairTopology().

Here is the caller graph for this function:

◆ addBidiEdgesForBufferStops()

int NBRailwayTopologyAnalyzer::addBidiEdgesForBufferStops ( NBEdgeCont & ec )

staticprivate

add bidi-edges to connect buffers stops in both directions

Definition at line 684 of file NBAlgorithms_Railway.cpp.

References addBidiEdge(), CENTER, getBrokenRailNodes(), NBEdge::getFromNode(), getRailEdges(), getRailNodes(), NBEdge::getToNode(), NBEdge::setLaneSpreadFunction(), TL, StringUtils::toBool(), toString(), WRITE_MESSAGEF, and WRITE_WARNINGF.

Referenced by repairTopology().

Here is the caller graph for this function:

◆ addBidiEdgesForStops()

int NBRailwayTopologyAnalyzer::addBidiEdgesForStops	(	NBEdgeCont &	ec,
		NBPTLineCont &	lc,
		NBPTStopCont &	sc,
		bool	minimal )

staticprivate

add bidi-edges to connect successive public transport stops

Definition at line 869 of file NBAlgorithms_Railway.cpp.

References addBidiEdge(), CENTER, SUMOAbstractRouter< E, V >::compute(), extendBidiEdges(), findBidiCandidates(), NBPTStopCont::get(), NBEdgeCont::getAllEdges(), OptionsCont::getFloat(), NBEdge::getID(), NBEdge::getLaneSpreadFunction(), NBPTLineCont::getLines(), OptionsCont::getOptions(), NBEdge::getPermissions(), getRailEdges(), getRailNodes(), NBPTLine::getRef(), NBPTStopCont::getReverseStop(), NBPTLine::getRouteEnd(), NBPTLine::getRouteStart(), NBPTLine::getStopEdges(), getTravelTimeStatic(), NBPTStopCont::insert(), NBEdge::isBidiRail(), NBPTLine::isConsistent(), isStraight(), SVC_RAIL_CLASSES, TL, toString(), WRITE_MESSAGE, and WRITE_WARNINGF.

Referenced by repairTopology().

Here is the caller graph for this function:

◆ addBidiEdgesForStraightConnectivity()

int NBRailwayTopologyAnalyzer::addBidiEdgesForStraightConnectivity	(	NBEdgeCont &	ec,
		bool	geometryLike )

staticprivate

add bidi-edges to connect straight tracks

Definition at line 1080 of file NBAlgorithms_Railway.cpp.

References addBidiEdge(), extendBidiEdges(), getBrokenRailNodes(), getRailEdges(), hasRailway(), isStraight(), TL, toString(), and WRITE_MESSAGEF.

Referenced by repairTopology().

Here is the caller graph for this function:

◆ allBidi()

bool NBRailwayTopologyAnalyzer::allBidi ( const EdgeVector & edges )

staticprivate

Definition at line 503 of file NBAlgorithms_Railway.cpp.

Referenced by allSharp(), and getBrokenRailNodes().

Here is the caller graph for this function:

◆ allBroken()

bool NBRailwayTopologyAnalyzer::allBroken	(	const NBNode *	node,
		NBEdge *	candOut,
		const EdgeVector &	in,
		const EdgeVector &	out )

staticprivate

Definition at line 463 of file NBAlgorithms_Railway.cpp.

References gDebugFlag1, NBEdge::getID(), and isStraight().

Referenced by reverseEdges().

Here is the caller graph for this function:

◆ allSharp()

bool NBRailwayTopologyAnalyzer::allSharp	(	const NBNode *	node,
		const EdgeVector &	in,
		const EdgeVector &	out,
		bool	countBidiAsSharp = false )

staticprivate

Definition at line 485 of file NBAlgorithms_Railway.cpp.

References allBidi(), and isStraight().

Referenced by extendBidiEdges(), and getBrokenRailNodes().

Here is the caller graph for this function:

◆ analyzeTopology()

void NBRailwayTopologyAnalyzer::analyzeTopology ( NBEdgeCont & ec )

static

Definition at line 108 of file NBAlgorithms_Railway.cpp.

References getBrokenRailNodes().

Referenced by NBNetBuilder::compute().

Here is the caller graph for this function:

◆ extendBidiEdges() [1/2]

int NBRailwayTopologyAnalyzer::extendBidiEdges ( NBEdgeCont & ec )

staticprivate

add further bidi-edges near existing bidi-edges

Definition at line 514 of file NBAlgorithms_Railway.cpp.

References NBEdgeCont::begin(), NBEdgeCont::end(), extendBidiEdges(), NBEdge::getFromNode(), NBEdge::getToNode(), NBEdge::getTurnDestination(), NBEdge::isBidiRail(), TL, toString(), and WRITE_MESSAGEF.

Referenced by addBidiEdgesForStops(), addBidiEdgesForStraightConnectivity(), extendBidiEdges(), extendBidiEdges(), and repairTopology().

Here is the caller graph for this function:

◆ extendBidiEdges() [2/2]

int NBRailwayTopologyAnalyzer::extendBidiEdges	(	NBEdgeCont &	ec,
		NBNode *	node,
		NBEdge *	bidiIn )

staticprivate

Definition at line 531 of file NBAlgorithms_Railway.cpp.

References addBidiEdge(), allSharp(), CENTER, extendBidiEdges(), NBEdge::getID(), getRailEdges(), NBEdge::getToNode(), NBEdge::getTurnDestination(), isStraight(), TL, and WRITE_WARNINGF.

◆ extendDirectionPriority()

void NBRailwayTopologyAnalyzer::extendDirectionPriority	(	NBEdgeCont &	ec,
		bool	fromUniDir )

static

Definition at line 1178 of file NBAlgorithms_Railway.cpp.

References NBEdgeCont::getAllEdges(), NBEdge::getID(), Named::getIDSecure(), NBEdge::getPermissions(), NBEdge::getPriority(), NBEdge::getStraightContinuation(), NBEdge::getStraightPredecessor(), hasRailway(), joinToString(), NBEdge::setPriority(), NBEdge::setRoutingType(), TL, toString(), WRITE_MESSAGE, WRITE_WARNING, and WRITE_WARNINGF.

Referenced by NBNetBuilder::compute().

Here is the caller graph for this function:

◆ findBidiCandidates()

std::set< NBPTLine * > NBRailwayTopologyAnalyzer::findBidiCandidates ( NBPTLineCont & lc )

staticprivate

identify lines that are likely to require bidirectional tracks

Definition at line 838 of file NBAlgorithms_Railway.cpp.

References NBPTLineCont::getLines().

Referenced by addBidiEdgesForStops().

Here is the caller graph for this function:

◆ getBrokenRailNodes()

std::set< NBNode * > NBRailwayTopologyAnalyzer::getBrokenRailNodes	(	NBEdgeCont &	ec,
		bool	verbose = false )

staticprivate

Definition at line 235 of file NBAlgorithms_Railway.cpp.

References allBidi(), allSharp(), OutputDevice::close(), OutputDevice::closeTag(), OutputDevice::getDevice(), NBEdge::getID(), OptionsCont::getOptions(), getRailEdges(), getRailNodes(), NBEdge::getTurnDestination(), hasStraightPair(), n, OutputDevice::openTag(), SUMO_ATTR_ID, SUMO_TAG_NODE, TL, StringUtils::toBool(), toString(), WRITE_MESSAGE, WRITE_MESSAGEF, OutputDevice::writeAttr(), and OutputDevice::writeXMLHeader().

Referenced by addBidiEdgesBetweenSwitches(), addBidiEdgesForBufferStops(), addBidiEdgesForStraightConnectivity(), analyzeTopology(), and reverseEdges().

Here is the caller graph for this function:

◆ getRailEdges()

void NBRailwayTopologyAnalyzer::getRailEdges	(	const NBNode *	node,
		EdgeVector &	inEdges,
		EdgeVector &	outEdges )

staticprivate

filter out rail edges among all edges of a the given node

Definition at line 219 of file NBAlgorithms_Railway.cpp.

References NBNode::getIncomingEdges(), NBNode::getOutgoingEdges(), and SVC_RAIL_CLASSES.

Referenced by addBidiEdgesBetweenSwitches(), addBidiEdgesForBufferStops(), addBidiEdgesForStops(), addBidiEdgesForStraightConnectivity(), extendBidiEdges(), getBrokenRailNodes(), isBidiSwitch(), and reverseEdges().

Here is the caller graph for this function:

◆ getRailNodes()

std::set< NBNode * > NBRailwayTopologyAnalyzer::getRailNodes	(	NBEdgeCont &	ec,
		bool	verbose = false )

static

Definition at line 390 of file NBAlgorithms_Railway.cpp.

References NBEdgeCont::begin(), NBEdgeCont::end(), hasRailway(), RAIL_SIGNAL, TL, toString(), and WRITE_MESSAGEF.

Referenced by addBidiEdgesForBufferStops(), addBidiEdgesForStops(), getBrokenRailNodes(), and NBRailwayGeometryHelper::straigthenCorrdidor().

Here is the caller graph for this function:

◆ getTravelTimeStatic()

double NBRailwayTopologyAnalyzer::getTravelTimeStatic	(	const Track *const	track,
		const NBVehicle *const	veh,
		double	time )

static

Definition at line 1172 of file NBAlgorithms_Railway.cpp.

References NBRailwayTopologyAnalyzer::Track::edge, NBEdge::getTravelTimeStatic(), and NBRailwayTopologyAnalyzer::Track::penalty.

Referenced by addBidiEdgesForStops().

Here is the caller graph for this function:

◆ hasRailway()

bool NBRailwayTopologyAnalyzer::hasRailway ( SVCPermissions permissions )

inlinestaticprivate

filter for rail edges but do not return (legacy) all purpose edges

Definition at line 117 of file NBAlgorithms_Railway.h.

References SVC_RAIL_CLASSES, and SVCAll.

Referenced by addBidiEdge(), addBidiEdgesForStraightConnectivity(), extendDirectionPriority(), getRailNodes(), and makeAllBidi().

Here is the caller graph for this function:

◆ hasStraightPair()

bool NBRailwayTopologyAnalyzer::hasStraightPair	(	const NBNode *	node,
		const EdgeVector &	edges,
		const EdgeVector &	edges2 )

staticprivate

Definition at line 437 of file NBAlgorithms_Railway.cpp.

References isStraight().

Referenced by getBrokenRailNodes().

Here is the caller graph for this function:

◆ isBidiSwitch()

NBEdge * NBRailwayTopologyAnalyzer::isBidiSwitch ( const NBNode * n )

staticprivate

Definition at line 756 of file NBAlgorithms_Railway.cpp.

References getRailEdges(), isStraight(), and n.

Referenced by addBidiEdgesBetweenSwitches().

Here is the caller graph for this function:

◆ isStraight()

bool NBRailwayTopologyAnalyzer::isStraight	(	const NBNode *	node,
		const NBEdge *	e1,
		const NBEdge *	e2 )

staticprivate

Definition at line 414 of file NBAlgorithms_Railway.cpp.

References NBEdge::getAngleAtNode(), NBEdge::getFromNode(), NBEdge::getToNode(), NBHelpers::normRelAngle(), SHARP_THRESHOLD, and SHARP_THRESHOLD_SAMEDIR.

Referenced by addBidiEdgesBetweenSwitches(), addBidiEdgesForStops(), addBidiEdgesForStraightConnectivity(), allBroken(), allSharp(), extendBidiEdges(), hasStraightPair(), and isBidiSwitch().

Here is the caller graph for this function:

◆ makeAllBidi()

int NBRailwayTopologyAnalyzer::makeAllBidi ( NBEdgeCont & ec )

static

Definition at line 136 of file NBAlgorithms_Railway.cpp.

References addBidiEdge(), CENTER, NBEdgeCont::getAllEdges(), OptionsCont::getOptions(), OptionsCont::getString(), hasRailway(), NBHelpers::loadEdgesFromFile(), NBEdgeCont::retrieve(), TL, toString(), WRITE_MESSAGEF, and WRITE_WARNINGF.

Referenced by NBNetBuilder::compute().

Here is the caller graph for this function:

◆ repairTopology()

int NBRailwayTopologyAnalyzer::repairTopology	(	NBEdgeCont &	ec,
		NBPTStopCont &	sc,
		NBPTLineCont &	lc )

static

Definition at line 114 of file NBAlgorithms_Railway.cpp.

References addBidiEdgesBetweenSwitches(), addBidiEdgesForBufferStops(), addBidiEdgesForStops(), addBidiEdgesForStraightConnectivity(), extendBidiEdges(), OptionsCont::getBool(), NBPTLineCont::getLines(), OptionsCont::getOptions(), and reverseEdges().

Referenced by NBNetBuilder::compute().

Here is the caller graph for this function:

◆ reverseEdges()

int NBRailwayTopologyAnalyzer::reverseEdges	(	NBEdgeCont &	ec,
		NBPTStopCont &	sc )

staticprivate

reverse edges sequences that are to broken nodes on both sides

Definition at line 572 of file NBAlgorithms_Railway.cpp.

References allBroken(), DEBUGNODEID, getBrokenRailNodes(), Named::getID(), getRailEdges(), NBPTStopCont::getStops(), joinToString(), n, NBTrafficLightDefinition::OSM_DIRECTION, TL, toString(), and WRITE_MESSAGEF.

Referenced by repairTopology().

Here is the caller graph for this function:

◆ updateTurns()

void NBRailwayTopologyAnalyzer::updateTurns ( NBEdge * edge )

staticprivate

recompute turning directions for both nodes of the given edge

Definition at line 1165 of file NBAlgorithms_Railway.cpp.

References NBTurningDirectionsComputer::computeTurnDirectionsForNode(), NBEdge::getFromNode(), and NBEdge::getToNode().

Referenced by addBidiEdge().

Here is the caller graph for this function:

The documentation for this class was generated from the following files:

Data Structures

Static Public Member Functions

Static Private Member Functions

Detailed Description

Member Function Documentation

◆ addBidiEdge()

◆ addBidiEdgesBetweenSwitches()

◆ addBidiEdgesForBufferStops()

◆ addBidiEdgesForStops()

◆ addBidiEdgesForStraightConnectivity()

◆ allBidi()

◆ allBroken()

◆ allSharp()

◆ analyzeTopology()

◆ extendBidiEdges() [1/2]

◆ extendBidiEdges() [2/2]

◆ extendDirectionPriority()

◆ findBidiCandidates()

◆ getBrokenRailNodes()

◆ getRailEdges()

◆ getRailNodes()

◆ getTravelTimeStatic()

◆ hasRailway()

◆ hasStraightPair()

◆ isBidiSwitch()

◆ isStraight()

◆ makeAllBidi()

◆ repairTopology()

◆ reverseEdges()

◆ updateTurns()